Topcoat or Clearcoat Solvent Based Acrylic Paint

-  Glossy Finish  ( 2K Component )

-  Premium Quality Grade 1

-  For Indoor & Outdoor Use

* Good Quality and Antirust

* Superb Glossy & Smooth Finish

* Weather Resistant & Corrosion Resistant

* Good scratch resistant & Chemical Resistant

* Excellent Outdoor Durability. 2X UV Protection

* Multipurpose Finishing & Super Flow Control For Brush, Roll and Spray

Recommended Uses:

This high performance clear coat is suitable for interior and exterior surfaces against harsh weather and it has excellent resistance to efflorescence. Such as metal fixtures, steel, alloy, cast iron, fabric plaster, cement, imprinted concrete, pebblewash, stone, red brick, rough tiling wall, PVC, plastic, statue, clay, ceramic, art & craft, advertising materials, paper and sculpture surfaces. (Not Applicable For Flooring Tile).

Direction For Use:

Remove loose flaking paint film. Ensure the prepaint surfaces are free from dirt, grease and other contaminants. Stir the paint well until homogeneous. Mix Part A and Part B at mixing ratio of 4.0/1.0. Pot life for mixture is 4 hours. Dilute with thinner if required depends on the application method and dry film thickness when painting the surfaces with the use of brush, roller or spray gun. Use solvent thinner for cleaning and washing. Touch-up can be done using a brush. Two coats are recommended to obtain high gloss finish. If 3 coats can gain extra durability and protection.

Apply Method: Air spray, brush or roller.

Theoretical Coverage: 12m2 per litre depending on application method & film thickness.